Vermont Natural Coatings PolyWhey Floor Finish - Semi Gloss, 1 Gallon | Eco-Friendly Wood Floor Sealer for Living Rooms, Kitchens & High-Traffic Areas

Product Description

Born of academic inquiry, scientific innovation, and Vermont ingenuity, our coatings meet the building industry’s high performance and safety standards. In an industry where toxins are the norm, Vermont Natural Coatings has found a ‘Safer Whey’. PolyWhey Floor Finish Ultra-Low VOCs Breathe easy with ultra-low VOCs Durable and Innovative An innovative floor finish meets ultra-durability, protecting your wood floors for years to come. Bio-Based Product Vermont Natural Coatings uses whey protein, a byproduct of cheesemaking, as a cross-linker to create a durable, long-lasting floor finish. How to Apply Details Ultra-low VOCs Quick drying; under 2 hours Neutral Odor Additional Product Information For optimum results apply in temps between 65F-80F with a relative humidity of 40%-60%. Avoid applying in direct sunlight. Three coats are recommended for optimum product performance.Finish will dry in two hours under normal conditions. High humidity or low temperature may lengthen dry time.Do not thin product as this can result in reduced performance. Preparation If applying to previously finished wood, sand surface to remove old coatings before applying new finish. If sanding the entire surface is not desired, sand areas of distress that can cause flaking. This allows blending of edges. Dust and wipe with a water-dampened cloth. Test the finish on a sample piece of wood to confirm compatibility and desired appearance. Application Stir well prior to use. Apply with brush, floor pad or t-bar. Apply thin, even coats taking care to prevent the finish from forming puddles. Overlap strokes and always maintain a wet edge. Sand lightly after first coat with very fine sandpaper (220 grit or finer).Vacuum dust and wipe with a water-dampened cloth and Vermont Natural Coatings Wood Cleaner. Never use steel wool or a tack cloth.Apply second coat.After second coat sand only if 24 hours have passed since the previous coat was applied. Sanding, vacuuming and cleaning between coats will aid adhesion and create a smoother surface.